How to HEN

How to HEN

Before Installing HEN for PS3, the installation of HAN is required

  • Install the HAN Support files to add the extra features needed to run HEN.
  • Both HAN & HEN must be (re)-enabled every time we boot the console for any homebrew, backup or PS2 backup as the console kind of reboots when exiting a PS2 game.

Webpages/ Bookmarks:

To make things easy, save thee links as ‘Bookmarks’ on the PS3 internet browser

How to Install HAN on Any PS3 on Firmware 4.84:

1. Insert USB flash drive into right most USB slot and Boot Ps3
2. Navigate to and open to Ps3 Browser
3. Press Start on controller and enter this web address: http://ps3xploit.com/hfw/han/han_installer.html
4. Select ‘Initialise HAN Installer’
5. Wait for Green Success text.
6. If failure to initialise, delete cookies, cache and web history. Set homepage to blank. Close browser and retry.
7. Once successful, select ‘Launch HAN Installation’
8. Wait for console to reboot. HAN Support files are now installed.

How to Install HEN on Any PS3 on Firmware 4.84:

Instructions (Step-By-Step):
1. Insert USB into right most USB port and boot your Ps3
2. Navigate to and select the Browser
3. Visit http://www.ps3xploit.com/hen/blind/han_flash_mount.html to enable flash mount
4. Once complete and at the XMB, navigate to and select ‘Package Manager’ under ‘Game’
5. Select ‘Install Package Files’
6. Select ‘Standard’
7. Install ‘Latest_HEN_Installer_signed.pkg’
If you get an error during installation YOU DID NOT ENABLE FLASH MOUNT, START FROM STEP 2.
8. Shutdown your Ps3

How to Enable HEN:

1. Boot Ps3
2. Navigate the XMB to ‘Game’
3. Select ‘Enable HEN’
4. If you return to the XMB, congratulations, HEN is enabled
5. If you receive and error, reboot and repeat from step 1

How to Update HEN:

1. Boot Ps3
2. Navigate the XMB to ‘Network/Hybrid Firmware Tools/PS3HEN Updater/Update PS3HEN/’
3. Select the update
4. Wait for download and installation to complete
5. Reboot Ps3
6. Enable HEN